Features
- Make sure this fitsby entering your model number.
- ALWAYS GET STRONG SUCTION; The pressure difference by up and down movement of the button gets the air out inside of the suction cup and it makes suction stronger. As you press more times typically until you don't see the red line, it's always possible to get maximum suction power, 18lb.
- ADJUSTABLE SWIVEL DESIGN; It could be adjusted and stopped with tension at any angle, which is from the wall down to 45 degrees by tilting down.
- REINFORCING INDICATOR FOR LONG LASTING; The suction cup button has a red line indicator to let you know when to repump it to maintain strong suction for long-lasting.
- UNIVERSAL FIT; The upper holder hole's diameter is 24mm, which fits all handheld shower head holder hose that follows an international standard. It can hold up to MAX 18 lb load on the non-porous surface such as woods, tiles, glass, mirror, PVC board, Acrylic board, antique bricks metal, etc.
- CURVED SURFACE; It can be attached to the non-porous curved surface that has a radius of more than 400 mm.
Product Images
Product description
Just pump and fix it
|
|
|
|
|
|---|---|---|---|
|
Possible to get max suction power As you get the air out thru multiple pumping, you can always reach the maximum suction power, 18 lb. |
Keeping the suction power When you see a red-line on the button, pump again to recover suction power. That will keep maintaining stable suction power for an extended period. |
Adjustable and stoppable It is adjustable and stoppable with tension at any angle to 45° from the wall. |
Universal fit design The swivel holder can hold various types of shower head or shower hoses. Just for making sure, check your shower head connector, large cone-shaped, diameter before ordering. |
Where does it stick best?
Suction cups adhere best to smooth, non-porous surfaces such as tile, glass, fiberglass, or metal.
A suction cup might work on the tiny dumpling or wavy texture due to the material’s high elasticity. But if there is too much air flowing on the surface that elasticity can not cover, suction won’t work.
To ensure a firm bond, surfaces should be free of dirt before attaching the suction cup.
The wet surface does not matter.
Installation and remove
|
|
|
|
|
|---|---|---|---|
|
Clean the surface Clean the rubber plate & the surface to attach. Spray water a little on the wall. It helps suction work better. |
Press button 7 to 8 times or more Pump the center button 7 to 8 times until the red line is not visible. |
Lock the knob Lock the knob clockwise. It adds extra suction power. |
Remove Loosen the knob anticlockwise. Push cards or spoons between the suction plate and wall to remove it. Do not use sharp edge stuff that could give damage the suction pad. |
Remove and reuse without drying
In the case of reuse, wash the suction cup with flowing water and follow
the installation instruction. No dry needed. A wet suction surface helps suction work smooth and better.